® stream electronic
Turbelle® stream electronic
Turbelle® stream electronic is a speed-controlled pump operating on safety extra-low voltage, to be employed in every aquarium from 200 to > 3,000 litres (52.8 to > 792.5 USgal.) for simulation of lapping waves or tidal currents. It contains a new microprocessor-controlled motor and thus can be called an “intelligent pump”:
The electronic motor adapts its speed automatically to the pump load and always seeks the best efficiency at the lowest possible consumption of energy. This energy consumption is about fifty per cent lower than in conventional pump motors. The pumps will be stopped immediately in case of blockage. After the blockage has been removed, the pumps will start up automatically after a delay of 20 seconds.
The pump driver has been provided with a fish care function, which causes a revolution of the spelling propeller every twenty seconds when the pump is at a standstill.
It can be controlled by Multicontroller 7095, 7096 as well as Wavecontroller 7092.
Flow rate 6105: 1.01 - 1.02 m/s
Flow rate 6155: 0.72 - 0.73 m/s
Controllable speed, wave simulation, tidal currents
Turbelle® stream 6155
For aquariums > 3,000 litres (800 USgal.)
Flow rate: 4,000 up to abt. 15,000l/h 1,050 to 3,950 USgal./h)
with Turbelle® Controller
Energy consumption: max. 52W
Power supply unit: 240V / 50Hz.
Cable length: 5m (196.8 in.)
Dimensions: diam. 90mm (3.5 in.)
Ejection: diam. 63mm (2.4 in.)
Magnet Holder with Silence clamp up to a glass thickness of 20mm (3/4")