Monitors & Controllers

In a temperature range from 16 to 42°C, water temperature is measured with accuracy of +/-1°C. Despite this accuracy, the digital thermometer battery has a relatively long life of up to a year.

This Programmable Aquarium Re-Minder provides aquariums with continuous monitoring of temperature, as well as a routine maintenance schedule. The Aqua- Minder flashes and beeps when a maintenance function is due (ex.- water change, filter maintenance, etc.) and/or the temperature has dropped or exceeded the programmed values.

For precise monitoring of the temperature and air humidity in the terrarium with a range from 0 °C to 70 °C (32 °F to 158 °F) and 20 to 99 % humidity. Extra long cable (90 cm) enables flexible positioning of the sensor.

For precise monitoring of the temperature and air humidity in the terrarium with a range from 0 °C to 50 °C (32 °F to 122 °F) and 30 to 90 % humidity. Easy to mount with suction pad.

The MARINA floating thermometer with suction cup is accurate and easy to read. It has a safety zone indicator for most tropical fish. Protect your fish from unsafe temperatures. Simply suction thermometer in the aquarium and you are ready to go. For fresh or saltwater aquariums.

Unique intergrated hydrometer and thermometer. Provides accurate measurement of specific gravity (degree of salinity) in a saltwater aquarium. Built in digital thermometer ensures water being tested is at correct temperature. Bubble-proof casing for easy reading results.

Consisting of pH controller 7070/2 and CO2 valve set 7074.11 with power supply unit 5012.01. The 12 Volt valve is nickel-plated and protected against corrosion. The adjustable time-interval meter permits the controlled distribution of CO2, preventing an overdose. The control station operates on safety extra-low voltage.

Wavecontroller 7092 fitted with a membrane terminal is a control unit to be used on all Turbelle® pumps with electronic motor, and can synchronously or alternately control two Turbelle® pumps.

The MARINA stainless steel thermometer is accurate and easy to read. It has a safety zone indicator for most tropical fish. Protect your fish from unsafe temperatures.

TUNZE® Multicontroller 7095 is a digital control unit for all Turbelle® pumps with Driver 7240.26 / 7240.27 or electronic motor. The unit simulates the different marine flow conditions in the aquarium. By means of the Pump Adapter 7094.40, Turbelle® classic 2002 and 4002 can also be controlled.

This water level alarm comes with three sensors, a run-dry sensor and two overflow sensors. Each sensor comes with a holding device which can be attached with silicone or can be clamped to horizontal or vertical panes. The holding devices can also be combined. The control unit has an optical indicator for each sensor and an alert sound emitter.

TUNZE® Multicontroller 7096 is a control device for all Turbelle® pumps fitted with an electronic motor, which can be adjusted and programmed by computer when attached by USB cable. The controller has been fitted with an 8-bit high-performance micro-processor and a memory module, which keeps the settings stored even in case of a power failure.

This pocket-sized measuring instrument has been designed to match the pH controller. The measuring instrument is mounted by means of two types of wall holding device. The electrode also comes with a universal holding device and thus solves almost all mounting problems. The controller is supplied with a long-life high-quality glass electrode, a cleaning solution and a 9V battery.

This set consists of mV Controller 7071/2 and switched socket outlet 7075.12. The switching output has an Ohmic load of 1,800 W at 230 V (900 W / 115 V). The switched socket ouelt also serves as a power supply for the controller..
On account of the adjustable time interval metering system, a careful ozone distribution is possible preventing an overdose.